Sanitary sampling valve of the spring-return plunger type with a hose-barb outlet, for drawing a representative and uncontaminated sample from a tank or process line. Process connection: clamp ferrule to DIN 32676 or ISO 2852.
Prices on request. Contact us for availability and quotations.
The valve is a plunger cock. Pressing the head lifts the plunger off its seat and opens a short, straight path from the process to the outlet; releasing it lets the spring close the valve. The dead volume is deliberately small so that the sample represents the bulk of the product and not what has been standing in the valve since the last draw. The outlet is a hose barb, which lets a short length of sample tubing be run into a bottle or a jar.
All three sampling valves in this catalogue are the same valve; they differ only in how they mount to the vessel or the line. The process connection on this one is a clamp ferrule to DIN 32676 or ISO 2852. Choose the mounting to suit the vessel: a threaded boss on a tank wall, a clamp ferrule on a hygienic line, or a union nut where the point is stripped down for cleaning.
Wetted parts are austenitic stainless steel, in practice AISI 316L (1.4404), with the product-contact surface finished to the hygienic norm of Ra 0.8 µm or better. The seal is chosen for the product and the sterilising regime; where the sample point is flamed or steamed between draws, say so, because that rules out several elastomers.
State the process connection and its size, the outlet form and hose bore, the body grade, the seal material, and whether steam sterilisation of the sample point is required. Sample-point technique matters as much as the valve: purge the dead leg before drawing, and keep the outlet covered between draws.
| Valve Type | Spring-return plunger cock (sampling cock) with a hose-barb outlet |
|---|---|
| Process Connection | clamp ferrule to DIN 32676 or ISO 2852 — the series and flange size must be stated |
| Clamp and Gasket Sizing | Sized on the flange diameter, not the bore: 34, 50.5, 64, 77.5, 91, 106, 119, 130, 155, 183 and 233.5 mm. Tube of 25, 33.7 and 38 mm all takes the 50.5 mm clamp and gasket |
| Wetted Material | Austenitic stainless steel; specify AISI 316L (1.4404) for wetted parts |
| Surface Finish | Ra < 1.0 µm on finely finished product-contact surfaces; Ra ≤ 0.8 µm is the finish usually quoted for hygienic service |
| Gasket | Natural or synthetic rubber of 75-85 IRHD to ISO 48, compatible with the product and the cleaning fluids and imparting no odour or taste. EPDM, NBR, VMQ, FKM or PTFE to be specified |
| Nearest Applicable 3-A Class | 3-A 53-07 Compression-Type Valves is the nearest 3-A class for a plunger cock of this kind. This is a reading of the class titles, not a statement from 3-A, and the goods are not asserted to carry the 3-A Symbol |
